Submission in progress. This will take a few minutes.

BBA-in-Aviation-Management.jpg

Prof Dr. Hicham Machmouchi

Dean – Faculty of Engineering

Telephone: +971 4 6050187

Email: Hicham.Machmouchi@emirates.com

Hicham Mashmouchi obtained his BSc degree in Aeronautical Engineering in 1984, a Masters degree in Thermodynamics and related studies in 1987 and a Doctorate in Mechanical Engineering/Rotating Equipment in 1994 - The University of Birmingham – England – UK. Currently, He is a Professor and Dean of School of Engineering at EAU. He has served as Director of Training Programmes and a Senior Lecturer in the Department of Power, Propulsion and Aerospace Engineering of Cranfield University in the UK, where he also contributed to the design and delivery of advanced postgraduate courses in his fields of specialization. Professor Mashmouchi was the Director of Engineering Programs and Research Projects Outreach at the School of Engineering and Physical Sciences of Heriot – Watt University – 2006-2011. He has been publishing high quality peer reviewed research papers in international Journals as well as conferences and proceedings. In addition, he has developed substantial experiences in initiating, managing, delivering and directing higher education programs in Europe and the Middle East. His research work is recognized nationally and internationally with their impacts demonstrated by the extent of citations and direct industrial adaptations and applications. Professor Machmouchi has more than 30 years of teaching experience at undergraduate, postgraduate, CPDs and professional levels. Currently, he has been involved in lecturing courses/modules directly related to Aircraft propulsion, Jet Engine Simulation and performance analysis, Gas Turbine Diagnostics and Prognostics. Professor Machmouchi has ample knowledge and appreciations of the challenges facing the Aviation and the Energy industries nationally and globally and he is a key speaker in Sustainability, Sustainable Aviation and Environmental Impact assessments.

  1. Ph.D. Mechanical and Manufacturing Engineering, The University of Birmingham, UK 1994.
  2. MSc. Thermodynamics and Related Studies, The University of Birmingham, UK, 1987.
  3. B.Sc. Aeronautical Engineering, University of Al-Fateh, Libya, 1984.
  • Gas Turbine Propulsion Systems
  • Aircraft propulsion performance Analysis
  • Jet Engine Simulation
  • GT and Jet Engine Diagnostics and Prognostics
  • Thermodynamics, Heat Transfer and Combustion
  • Automatic Control Systems
  • Aeronautical & Mechanical Engineering
  • Computational Fluid Dynamics
  • GT and Jet propulsion Performance and System Analysis
  • Aerodynamics
  • Energy and Renewable Energy Systems
  • Sustainable Aviation
  • Structural Analysis
  • Material Integrity and selection
  1. Hicham Machmouchi, Jinto Jose and Ajit Yasodharan; On the Performance of SiC/SiC Ceramic Matrix Composite Material for LPT Rotor Blades of a Boeing 777 - GE90 Jet Engine; Conference Proceeding; Fourth International Aviation Management Conference, IAMC 2022; Dubai, UAE.
  2. Hicham Machmouchi & Ravishankar Pillai; Comparison of the Performance of Refrigeration Systems With and Without Nanoparticles; Conference Proceeding; Eleventh International Conference On Sustainable Development and Planning; 2020, WIT Press. ISBN: 978-1-78466-377-3; eISBN:978-1-78466-378-0.
  3. Hicham Machmouchi & Ravishankar Pillai; Comparison of the Performance of Refrigeration Systems With and Without Nanoparticles; ISSN: 1746-448X (print) and ISSN: 1746-3541 (online) Second International Conference on Urban Growth and the Circular Economy; 2020, WIT Press.
  4. Hicham Machmouchi & Ravishankar Pillai; Analysis of Novel Refrigeration Systems Performance With and Without NanoParticles. International Journal of Energy Production and Management Volume 6, #3, 2020-2021, WIT Press, UK.ISSN: 2056-3280 (on line) and ISSN: 2056-3272 (paper format).
  5. Hicham Machmouchi, Shilpa Thomas, Omar Chafic and Ajit Yesodharan – “On the Reduction of Interaction of Shock Waves and Boundary layers at the Intake of a Supersonic Ramjet”. 11th International Conference on Sciences, Technology and Social Sciences, 14-15 September 2019, Jl.Ir. H Juanda, South Kuta Beach, Kuta 80361, Bali-Indonesia.
  6. H. Mashmoushy, ‘Integration of a Combined Heat and Power (CHP) Technology into a Simple Cycle Gas Turbine Unit at Al-Aweer Power plant in the UAE’.  The Eighth Jordanian International Mechanical Engineering Conference (JIMEC 2014),  22-23 September, 2014, Amman, Jordan.
  7. Mashmoushy and H. Bajwa, ‘2D Investigation of Flow Characteristics of a Compressor Cascade Comprising Second Generation and Controlled Diffusion Airfoil’. The Eighth Jordanian International Mechanical Engineering  Conference (JIMEC 2014),  22-23 September, 2014, Amman, Jordan.
  8. H. Mashmoushy, “Design Optimization of the Desalination Process at Jebel Ali plant in the United Arab Emirates”. Bukharest – Romania,1 June 2013; Proceedings of the 4th International Conference on Energy and Sustainability. Bukharest, Romania. pp 133 – 144.
  9. H. Mashmoushy, ‘Analytical and Computational Study of Utilising LSCs Luminescent Solar Concentrators Incorporated with Multi-Junction Photovoltaic Cells in the UAE’. Porto-Portugal, 10 May 2013. Proceedings of the (ICEE) International Conference on Energy and the Environment. Porto, Portugal. ISBN: 978-972-95396-8-8.
  10.  Bakhtar, R. J. K. Henson and H. Mashmoushy - ‘On the Performance of a Cascade of Turbine Rotor Tip Section Blading in Wet Steam, Part 5: Theoretical Treatment’, Proceedings of Institution of Mechanical Engineers, April 2006 Vol. 220 NO C4, pp. 457 – 472. ISSN 0954-4062.
  11.  F. Bakhtar, A. J. White, H. Mashmoushy - ‘Theoretical Treatments of Two-Dimensional two-phase flows of steam and Comparison with cascade experimental measurements’, Journal of Mechanical Engineering Science, Part C – Special Issue on Wet Steam’, March 2005, Proceedings of Institution Mechanical Engineers, Vol. 219. pp. 1335-1355. ISSN 0954-4062.
  12.  F. Bakhtar and H. Mashmoushy and Raya Al-Dada - ‘Effect of Charge and ionisation on Two-Phase Flow in Steam Turbines’. EPRI, Electric Power Research Institute, Palo Alto, CA: 2005. 1010738, USA.
  13.  F. Bakhtar, H. Mashmoushy and Raya Al-Dada - ‘Electrostatic Effects in Nucleating Flows of Steam’.  EPRI, Electric Power Research Institute, Palo Alto, CA: 2004. 1010738, USA.
  14.  Mashmoushy, M. R. Mahpeykar and F. Bakhtar - ‘Studies of Nucleating and Wet Steam Flows in Two-Dimensional Cascades’, Journal of Mechanical Engineering Science – Special Issue on Wet Steam’, Vol. 218, Part C, pp. 843-858, 2004.
  15.  F. Bakhtar, H. Mashmoushy and O. C. Jadayel - ‘Calibration Characteristics of a Three-hole Probe and Static Tube in Wet Steam’, published in International Journal of Heat and Fluid Flow, 22 (2001).  pp. 537-542, Ref.: HFF 6289.
  16.  H. Mashmoushy, Z. zhang, C.R. Thomas - ‘Characterization of the Breaking Force of Latex Particle Aggregates by Micromanipulation’, International Journal of Chemical Engineering, 16, 278-283, 1999.
  17.  H. Mashmoushy, A. Kleining, Z. Zhang and C.R. Thomas -  ‘Prediction of Yeast Cell-Disruption Efficiency during High-Pressure Homogenisation’, Biotechnology and Bioengineering Journal,  4, pp. 117-121, 1998.
  18.  H. Mashmoushy, Z. Zhang and C. R. Thomas – ‘ Micromanipulation Measurement of the Mechanical Properties of Baker’s Yeast Cells’, Biotechnology Techniques, Vol. 12, December 1998, pp. 925 – 929.
  19.  C. Chu, H.Mashmoushy, Z. Zhang, C.R. Thomas - ‘Micromanipulation Studies of Bacterial Cell Strengths’, Proceedings of the 1998 IchemE Research Event in CM-ROM Records, Newcastle, U.K., 1348-1388,  ISBN 085295400X, 1998.  Awarded the IchemE first prize for the best poster.
  20.  F. Bakhtar, H. Mashmoushy and O. C. Jadayel - ‘Modelling of Two-Phase Flows of Steam in Turbines’, Proceedings of the 11th International Heat Transfer Conference, IHTC, Vol. 2, 157-162, ISBN: 1560327979; Kyongju, Korea, 23-28 August 1998.
  21.  Bakhtar, H. Mashmoushy and J. R. Buckley - ‘On the Performance of a Cascade of Turbine Rotor Tip Section Blading in Wet Steam’, Part 1: Generation of Wet Steam of Prescribed Droplet Sizes’, Proceedings of Institution Mechanical Engineers, Part C, 211 (C7), 519-529, 1997.
  22.  Bakhtar, H. Mashmoushy and O. C. Jadayel - ‘On the Performance of a Cascade of Turbine Rotor Tip Section Blading in Wet Steam’, Part 2: Surface Pressure Distributions’, Proceedings of Institution Mechanical Engineers, Part C, 211 (C7), 531-540, 1997.
  23.  Bakhtar, H. Mashmoushy and O. C. Jadayel - ‘On the Performance of a Cascade of Turbine Rotor Tip Section Blading in Wet Steam’, Part 3: Wake Traverses’, Proceedings of Institution Mechanical Engineers, Part C, 211 (C8), 639-648, 1997.
  24.  Blewitt, H. Mashmoushy, Z. Zhang, C.R. Thomas - ‘Measurement of Plant Cell Mechanical Properties using Micromanipulation’, in Plant Biomechanics 1997: A Chapter in a book, eds. G. Jeronimidis and J.F.V. Vincent, pp.22-24, Centre for Biomimetics, The University of Reading (September 1997). ISBN 0 7049 1241.
  25.  H. Mashmoushy, A. Kleining, Z. Zhang, C.R. Thomas - ‘Can We Predict the Breakage of Yeast Cells?’, Chemica 96, 24th Australian and New Zealand Chemical Engineering Conference and Exhibition, Sydney, Australia, Sept. 1996, Vol. 5. ISBN 0 85825 658 5.
  26.  On the performance of a steam turbine rotor blades in wet steam’.  Birmingham Publications – The University of Birmingham, UK, 1994. ISSN 226117.